What Is Draft Control On A Tractor. Draft control on ford tractor It should go into the ground only slightly and no further. From everything that I can find on Google searches, the Allis Traction Booster feature worked the same way as draft control on Ford tractors did.
Software from jingshentang.com
When you're using a "soil engaging implement" such as a moldboard plow, a subsoiler, or even a disc, use the draft control lever only with the position control lever left in the raised position Here's what draft control on a tractor is, what it does and why it does it
Software
The draft control lever is used ONLY when you're wanting "draft control" for your implement. What it does care about, if you adjust the sensitivity of the draft control, is how much "draft" is applied to the lower links and how much pressure is applied to the top link when that draft increases. Do not lower the touch control any further and try the plow at this position of the touch control handle
Draft control with a box blade LS XR 4140H Tractor YouTube. It should go into the ground only slightly and no further. Look at a plow or cultivator on a 3 point hitch, and visualize the forces that would occur if the implement encounters "heavy going": the implement will pull back on the 3 point arms, which will simultaneously cause a force pushing toward the tractor on the toplink.
What is draft control Page 3. What it does care about, if you adjust the sensitivity of the draft control, is how much "draft" is applied to the lower links and how much pressure is applied to the top link when that draft increases. The sensor is usually mounted on the lower link arms of the tractor's three-point hitch, where it can detect changes in the amount of force required.