2 Post Lift Installation Instructions. How To Install A 2 Post Lift Read this manual thoroughly before installing, operating, or maintaining this lift Position Power side Post Lay down two posts on the installation site paralle l, position the Power side post according to the actual installation environment
Atlas 2 Post Lift Installation Instructions from guidediagramenrique.z21.web.core.windows.net
Installation Instructions Step 1 Measure lift area and check for defects Step 2 Cylinder assembly Step 3 Position columns and uprights, level columns and install top beam Step 4 Install anchor bolts and re-level columns Step 5 Install and adjust cables Step 6 Install power unit, hoses and cut-off cable Step 7 Install arms Step 8 Install spin up. The floor on which the lift is to be installed must be 4-¼" inch minimum thickness concrete, with a mini
Atlas 2 Post Lift Installation Instructions
Installation Instructions Step 1 Measure lift area and check for defects Step 2 Cylinder assembly Step 3 Position columns and uprights, level columns and install top beam Step 4 Install anchor bolts and re-level columns Step 5 Install and adjust cables Step 6 Install power unit, hoses and cut-off cable Step 7 Install arms Step 8 Install spin up. NOTE: Symmetric arm kit is also available for the HD2P-9000AC and HD2P-9000AF Position Power side Post Lay down two posts on the installation site paralle l, position the Power side post according to the actual installation environment
Challenger Lift Installation Manual. Only operate your Lift between temperatures of 41°F to 104°F (5°C to 40°C) Louisville, Kentucky 40219 Email:[email protected] site:www.challengerlifts.com Office 800-648-5438 / 502-625-0700 Fax 502-587-1933 IMPORTANT: READ THIS MANUAL COMPLETELY BEFORE INSTALLING or OPERATING LIFT
Rotary 2 Post Lift Installation Instructions. Refer to markings for proper load on electrical receptacles Anyone who will be in the vicinity of the lift when it is in use are recommended to read the following publications: